330 × 320 × 325 mm. That's 105% more space than the 256 mm class. A full-scale helmet, in one piece. A batch of 40 fidget toys, in one run. The kind of project that used to mean slicing your model into chunks—or starting over when the seams didn't line up—now just fits.
Modular Add-ons1
Add a New Dimension with Blade Cutting
Swap the toolhead cover for the cutting module, and the A2L isn't just a printer anymore—it cuts. Stickers, leather, fabric, paper. Custom livery for your model plane? Done. A leather wrap for the handle of your Excalibur? Done.
Alignment by Smart Phone.
Decal Cutting
Pen Drawing
Adaptive Vibration Compensation
A model gets taller. It gets heavier. The way the machine vibrates changes with it. Most printers run input shaping once at startup and call it done. The A2L runs Adaptive Vibration Compensation—a real-time calibration matrix that factors in both toolhead position and shifting bed load, retuning the resonance model layer by layer as the print grows. The last layer comes out as clean as the first.
Granular Damper
Software handles the vibration it can predict. Hardware handles the rest. Inside the A2L's gantry sit two Granular Dampers—sealed chambers packed with fine particles that dissipate vibration through countless micro-collisions. It's a damping technique borrowed from aerospace and precision machinery, rarely seen in desktop 3D printers. The result: surface ripples and ghost lines stay out of your prints, even at full build height.
Automatic Material System2
Multi-Color Made Easy
Multi-color printing isn't new. Doing it thousands times in a row, without a single jam, is. That's the bar AMS lite is built to clear. Over a million users worldwide have put it through long, color-heavy prints—the kind where one bad swap ruins twelve hours of work—and it keeps swapping.
Support 2nd-Gen AMS
Pair the A2L with the 2nd-Gen AMS, and your filament gets a sealed, climate-controlled home—dried on demand before each print, kept airtight between them. Need more colors? Need different material types running side by side? AMS lite and the 2nd-Gen AMS share the same embedded buffer system, so you can stack and mix them: four spools, eight spools, sixteen spools—whatever your project asks for, fed cleanly through one queue.
Most print failures happen quietly—the nozzle keeps moving, but the part stopped forming hours ago. Sensors along the extrusion path, paired with the PMSM extruder as a feedback node, feed a Bambu-trained algorithm that catches filament tangle, runout, nozzle clumping, and air printing—then pauses A2L and guides you through the fix on Bambu Handy.
Nozzle Clumping Detector
Filament Grinding
Air Printing
Auto Flow Dynamics Calibration
Repeatable Sharp Print Details
Most printers calibrate flow once and trust it for every print after. A2L recalibrates every time. Before each job, Flow Dynamics Calibration measures how filament actually flows through this nozzle, with this spool, today—and builds a nonlinear model of the entire extrusion path. Nozzle wear, filament moisture, a fresh roll—all factored in before the first layer goes down. Sharp corners. Clean details. Print after print.
A2L VS. Printer without Auto Flow Dynamics Calibration
UL GREENGUARD Certified
Print with Confidence, Breathe with Peace of Mind
The A2L is certified under the UL 2904 standard for 3D printing indoor air quality when used with official filaments. Testing with our core lineup—including Bambu PLA Basic, PLA Pure, and PETG Basic—confirms ultra-low emissions, making the A2L safe for indoor use.
Engineered for Silence
Print Quietly. Work Comfortably.
The A2L uses active motor noise cancellation, precision linear rails, and intelligent fan scaling to deliver a seamless experience. In Silent Mode, it operates at just 49dB5—as peaceful as a quiet library.
Connectivity & Privacy
Connect Your Way
Your printer, your privacy. Use Bambu Cloud for effortless cross-device connectivity, or switch to LAN-only mode for a secure, local-network experience. Total control over how you connect.
Feature:
Large 330 × 320 × 325 mm build volume
Maximum print speed up to 500 mm/s
Stainless steel nozzle with 300°C maximum temperature
Hardened steel extruder gear for durability
Supports PLA, PETG, TPU, PVA, PLA-CF and PETG-CF
Built-in camera with timelapse support
Filament run-out, tangle detection and power loss recovery
AMS Lite included for multi-color and multi-material printing
