Bambu Support For Abs White
Rs. 899.00 INR
Sale price
Rs. 899.00 INR
Regular price
Rs. 0.00 INR
Skip to product information
Bambu Support For Abs White
Rs. 899.00 INR
Sale price
Rs. 899.00 INR
Regular price
Rs. 0.00 INR
Features:
- Optimized support material specifically for ABS printing
- Easy-to-remove support structure with clean tear-away
- Odorless and stable for long-duration prints
- Fully compatible with Bambu AMS
- High-temperature resistant spool (PC+ABS, 90°C)
- Supports up to 55° overhang and 30 mm bridging
- Works with Cool Plate, High Temp Plate, and Textured PEI
- Resistant to most oils and grease for engineering applications
Bambu Support for ABS
Enhance your ABS printing experience with our innovative support material. Designed for effortless printing and hassle-free removal, this material ensures a flawless support interface every time. Fully compatible with the AMS systems, it streamlines your ABS printing process from start to finish. Say goodbye to tedious support removal and enjoy a smoother, more efficient workflow!
Superior Support Interface Quality
Support for ABS enables a 0 Top Z distance and 0 Top interface spacing when printing, ensuring a scar free support surface. This enhances the sharpness of details, improving the overall appearance and integrity of your final prints.
Accessory Compatibility
| Recommended | Not Recommended | |
| Build Plate |
Smooth PEI Plate, Textured PEI Plate
|
Cool Plate SuperTack
|
| Hotend |
Hotend with Hardened Steel Nozzle 0.4 mm / 0.6 mm / 0.8 mm
Hotend with Stainless Steel Nozzle 0.4 mm
|
Hotend with Hardened Steel Nozzle 0.2 mm
Hotend with Stainless Steel Nozzle 0.2 mm
|
| Bambu Liquid Glue / Glue Stick | Bambu Liquid Glue / Glue Stick | / |
| Recommended Printing Settings | |
| Drying Settings (Blast Drying Oven) | 80 °C, 4 h |
| Printing and Keeping Container's Humidity | < 20% RH (Sealed, with Desiccant) |
| Nozzle Temperature | 240 - 270 °C |
| Bed Temperature (with Glue) | 80 - 100 °C |
| Printing Speed | < 100 mm/s |
| Physical Properties | |
| Density | 1.16 g/cm³ |
| Vicat Softening Temperature | N / A |
| Heat Deflection Temperature | N / A |
| Melting Temperature | 195 °C |
| Melt Index | 11.6 ± 0.7 g/10 min |
| Mechanical Properties | |
| Tensile Strength | N / A |
| Breaking Elongation Rate | N / A |
| Bending Modulus | N / A |
| Bending Strength | N / A |
|
Impact Strength |
N / A |
Printing Tips
• Support for ABS is soluble in limonene. Please pay attention to the usage norms and safety.
• Pungent and unpleasant odors may be released during printing. Make sure your printer is enclosed and placed in a well-ventilated area.
• When layer strength is required, it is recommended to increase the flushing volume to above 800 mm³. If the flushing is not thorough, it may reduce the layer adhesion of the model at surfaces that are on the same horizontal plane as the support surface.
• By increasing the "initial layer speed", a more peelable support can be obtained. However, this will increase the risk of warping.
• Dry out before use for higher print quality. Drying conditions: 80℃ for 4 hrs in the blast drying oven; 85 - 95 ℃ for 6 hrs in the X1 Series Heatbed.